Plastics are not easily biodegradable; and because of these characteristics they can remain under landfill and water for a very long period of time. All over the world only 6% of waste plastics are recycled and the rest of all waste plastics are dumped into landfills. An experiment was conducted in a laboratory scale batch process under Labconco’s fume hood utilizing low density polyethylene (L...

Knowledge about movement of hydrocarbon-based fuels in ice is relevant to marine and terrestrial fuel spills in polar regions, and to the dispersion of hydrocarbon-based drilling fluids used to maintain lithostatic pressure in deep ice coring projects. The latter is of concern from both environmental and sample integrity aspects, particularly for projects that plan to sample deep subglacial env...

Introduction The latest studies of the overall characteristics of hypersonic flying vehicles with airbreathing engines have shown that these vehicles are fairly promising. Some additional problems arise, however, that are related to the definition of the general shape of the aircraft, the choice of propulsion type and operation regimes, the engine size and position on the aircraft body. There h...

An investigation of the process by which bubbles form in superheated liquid-liquid emulsions is reported. A theoretical model for the rate of bubble nucleation is developed that is valid for any binary liquid system. Because of the interesting "microexplosion" phenomenon postulated to occur during combustion of fuel/water emulsions, special attention is focused on hydrocarbon/ water/surfactant ...

Due to the shortage of liquid hydrocarbon fuels for compression ignition engines, researchers have constantly been looking for alternative fuels. Recently, dim ethyl ether (DME) with its interesting properties, such as high cetane number and low exhaust emission has drawn a lot of interst as a suitable fuel for diesel engines. The main objective of this study was to assess the potentials and fe...

Direct fuel oxidization yields major fuel cell power system simplifications and potential performance advantages, particularly for an automotive power plant application. The system simplification is particularly striking when a direct fuel system is compared to an “indirect” fuel cell system in a vehicle (where the fuel on board must be “reformed” and “cleaned” to provide a hydrogen-rich gas “r...

Petroleum diesel is a complex mixture of liquid hydrocarbons and mainly used as fuel in transport vehicles. The practice of manual siphoning of diesel from fuel tanks is common in developing countries but hydrocarbon pneumonitis due to diesel siphonage is rarely reported. We report pneumonitis following diesel fuel siphonage in a 30-year-old driver. Initially patient had severe nausea and vomit...

the waste tyres represent a source of energy and valuable hydrocarbon products. waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. the effects of basic catalysts (mgo and caco3) were studied on the pyrolysis products. the distribution ratio of gas, liquid and char with mgo and caco3 were 24.4:39.8:35.8 wt % and 32.5:32.2:35.2 wt % respectively at 350°c for 2...

The authors introduced waste plastic pyrolysis oil (WPPO) as an alternative fuel characterized in detail and compared with conventional diesel. High density polyethylene, HDPE, was pyrolyzed in a self-designed stainless steel laboratory reactor to produce useful fuel products. HDPE waste was completely pyrolyzed at 330-490°C for 2-3 hours to obtain solid residue, liquid fuel oil, and flammable ...